Samurai distributor on LJ 80/81 motor
Moderator: Smuz
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Samurai distributor on LJ 80/81 motor
G'Day, I currently have a Suzuki Stockman with the LJ80/81 motor ( F8A 797cc motor )
I seen a post on here where someone installed a Samurai distributor on this motor,
( think it was this motor they was talking about )
Was just trying to find out if if there was a certain type of Samurai distributor that they used, i did find this one on ebay for models 1984 -1990
Electronic Ignition Distributor For Suzuki Jimny Samurai SJ410 SJ413 1.3L G13A
http://www.ebay.com.au/itm/Electronic-I ... Sw6n5Xq~hE" onclick="window.open(this.href);return false;
Is there any noticeable hassles trying to get it to fit or are they pretty much a drop in item.
Any information would be greatly appreciated.
Cheers.
I seen a post on here where someone installed a Samurai distributor on this motor,
( think it was this motor they was talking about )
Was just trying to find out if if there was a certain type of Samurai distributor that they used, i did find this one on ebay for models 1984 -1990
Electronic Ignition Distributor For Suzuki Jimny Samurai SJ410 SJ413 1.3L G13A
http://www.ebay.com.au/itm/Electronic-I ... Sw6n5Xq~hE" onclick="window.open(this.href);return false;
Is there any noticeable hassles trying to get it to fit or are they pretty much a drop in item.
Any information would be greatly appreciated.
Cheers.
Re: Samurai distributor on LJ 80/81 motor
That was my write up, here: viewtopic.php?f=53&t=7720&hilit=Samurai+distributor" onclick="window.open(this.href);return false;
It needs to be from a carbureted samurai, very easy swap
It needs to be from a carbureted samurai, very easy swap
Revolving door of LJ's, currently down to one LJ 81
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Cheers, just trying to find out which years the carburetor models were made from and till.
The ebay listing tells me it as a Electronic Ignition Distributor For Suzuki Jimny Samurai SJ410 SJ413 1.3L G13A
It fits Suzuki Sierra 1324cc from 1984 -1990
Hoping these are the carburetor models.
The ebay listing tells me it as a Electronic Ignition Distributor For Suzuki Jimny Samurai SJ410 SJ413 1.3L G13A
It fits Suzuki Sierra 1324cc from 1984 -1990
Hoping these are the carburetor models.
Re: Samurai distributor on LJ 80/81 motor
Yes, that would be it. Only a couple wires to hookup.
Revolving door of LJ's, currently down to one LJ 81
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Cheers, might pick one up and see how it goes.
Appreciated.
Appreciated.
Re: Samurai distributor on LJ 80/81 motor
The 1.6carb distributor works aswel
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Cheers,
Can i also ask what 1.6carb distributor is from?
Can i also ask what 1.6carb distributor is from?
Re: Samurai distributor on LJ 80/81 motor
We didn't get a 1.6 carb in Canada.
Revolving door of LJ's, currently down to one LJ 81
Re: Samurai distributor on LJ 80/81 motor
The vitara has the 1.6 engine
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Cheers, i will also check out the vitara carburetor as well.
Re: Samurai distributor on LJ 80/81 motor
before this mod my LJ80 barely worked if you had to pee...it hated humidity. After the dist swap you could drive through some pretty deep water with no issues.
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go
Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Hi, just interested to know if anyone had a part number for these distributors for the samurai,
The one i just ordered of ebay arrived to today and is not even close to fitting.
http://www.ebay.com.au/itm/Electronic-I ... Sw6n5Xq~hE" onclick="window.open(this.href);return false;
The original one that came out was pretty close to 4 inches long, the one that arrived was around 3.3 inches long.
Bit of a surprise when that arrived.
Any links,, part numbers or information on where to find these samurai distributors would be greatly appreciated.
The one i just ordered of ebay arrived to today and is not even close to fitting.
http://www.ebay.com.au/itm/Electronic-I ... Sw6n5Xq~hE" onclick="window.open(this.href);return false;
The original one that came out was pretty close to 4 inches long, the one that arrived was around 3.3 inches long.
Bit of a surprise when that arrived.
Any links,, part numbers or information on where to find these samurai distributors would be greatly appreciated.
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Hi, Has anyone got a part number for these samurai distributors?
Definitely think i got the wrong one.
It would be greatly appreciated.
Cheers.
Definitely think i got the wrong one.
It would be greatly appreciated.
Cheers.
Re: Samurai distributor on LJ 80/81 motor
The link you posted looks like the correct one. Should be for an early carb'ed Samurai, 1986-88.
The only difference between an ordeal and an adventure is your attitude
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Yes, i thought it was the one i needed, but when it arrived the shaft is too short.
The part number on it was 33100-60A10 which says it is for the samurai.
So was hoping someone here might be able to tell me what the part number of their distributors are, or even if they have a link to somewhere where they got theirs from.
The part number on it was 33100-60A10 which says it is for the samurai.
So was hoping someone here might be able to tell me what the part number of their distributors are, or even if they have a link to somewhere where they got theirs from.
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Any chance anyone has a link to where they got theirs from?
Still no luck in finding any information on the right one,
Just all i know is the one out of the LJ 81 motor ( F8A 797cc motor ) has a 4 inch long shaft and is 1 inch in diameter.
The one of ebay has a 3.2 inch long shaft.
Any information would be greatly appreciated.
Cheers.
Still no luck in finding any information on the right one,
Just all i know is the one out of the LJ 81 motor ( F8A 797cc motor ) has a 4 inch long shaft and is 1 inch in diameter.
The one of ebay has a 3.2 inch long shaft.
Any information would be greatly appreciated.
Cheers.
Re: Samurai distributor on LJ 80/81 motor
I just found used ones off a carbed samurai.
Revolving door of LJ's, currently down to one LJ 81
Re: Samurai distributor on LJ 80/81 motor
Same here.Ruby wrote:I just found used ones off a carbed samurai.
The only difference between an ordeal and an adventure is your attitude
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
Cheers for the replies,
Any chance that you could post a link to where you have found them?
Still struggling to locate anything.
Would be greatly appreciated.
Any chance that you could post a link to where you have found them?
Still struggling to locate anything.
Would be greatly appreciated.
-
- Dreams of LJs all day
- Posts: 12
- Joined: Fri Aug 18, 2017 4:39 pm
- Location: Australia
Re: Samurai distributor on LJ 80/81 motor
No chance for a link to where you found them by any chance?Ruby wrote:I just found used ones off a carbed samurai.
Re: Samurai distributor on LJ 80/81 motor
It was just local for for sale listings. Someone posted samurai parts for sale. Could be off-road sites in the forums.
Revolving door of LJ's, currently down to one LJ 81
Re: Samurai distributor on LJ 80/81 motor
I got mine at a local 4x4 swap meet.
The only difference between an ordeal and an adventure is your attitude
- Meatloaf
- LJ Enthusiast
- Posts: 103
- Joined: Sun Jun 26, 2005 8:37 pm
- Location: Belleville, Ontario, Canada
Re: Samurai distributor on LJ 80/81 motor
Since nobody has answered your question yet, I looked under my hood and my "spares" bucket, and found the following numbers on the ID plate for the disty:bluesilver wrote:...The part number on it was 33100-60A10 which says it is for the samurai. So was hoping someone here might be able to tell me what the part number of their distributors are ...
33100-83030
100291-0440
HTH,
Tim.
One Owner 1981 LJ80