LJ axle rebuild part 2: Front Knuckle Rebuild

Links to articles to repair/upgrade your L series Suzuki

Moderator: Smuz

Post Reply
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

LJ axle rebuild part 2: Front Knuckle Rebuild

Post by Smuz » Sun Mar 26, 2006 10:32 pm

http://www.lj10.com/howto/axle/part2/

Sending the article to Jimny. Pesky thing is 32mb, so I gotta send it in 10 sections. May take a bit to get it up.

Patience, grasshopper.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Eddy
LJ Enthusiast
LJ Enthusiast
Posts: 489
Joined: Fri Jul 15, 2005 7:02 am
Location: . Waikerie . South Oz

Post by Eddy » Sun Mar 26, 2006 11:10 pm

... waiting patiently Sensei! :|
Searching for my next LJ
.[____].
(.0!!!!0.)
[]------[]

'77 Leyland Terrier
'80 Nissan 720 4X4 ute
AND A LJ!!!
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

Post by Smuz » Sun Mar 26, 2006 11:16 pm

Eddy wrote:... waiting patiently Sensei! :|
Prolly more patiently then I am. Bust my rear to write this article, and then the damn mail won't take it! Grrr.

It'll work out.tho.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Eddy
LJ Enthusiast
LJ Enthusiast
Posts: 489
Joined: Fri Jul 15, 2005 7:02 am
Location: . Waikerie . South Oz

Post by Eddy » Sun Mar 26, 2006 11:24 pm

:? ... so ... how come it be that you caint post it yourself? :?:
Searching for my next LJ
.[____].
(.0!!!!0.)
[]------[]

'77 Leyland Terrier
'80 Nissan 720 4X4 ute
AND A LJ!!!
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

Post by Smuz » Sun Mar 26, 2006 11:35 pm

Eddy wrote::? ... so ... how come it be that you caint post it yourself? :?:
Because this goes on the main site. I'm a forum admin, not a site admin. I don't have FTP access to the main site. Jimny and Steve do that stuff. They don't let me mess around with the main site.......they're either chickens or very smart, depending on your point of view.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Eddy
LJ Enthusiast
LJ Enthusiast
Posts: 489
Joined: Fri Jul 15, 2005 7:02 am
Location: . Waikerie . South Oz

Post by Eddy » Sun Mar 26, 2006 11:56 pm

Smuz wrote:......they're very smart.......

Ahhh, I see ...
Searching for my next LJ
.[____].
(.0!!!!0.)
[]------[]

'77 Leyland Terrier
'80 Nissan 720 4X4 ute
AND A LJ!!!
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4739
Joined: Wed May 28, 2003 7:02 am
Location: KANSAS
Contact:

Post by Jimny » Mon Mar 27, 2006 5:02 am

hehehe
I'd rather be driving my LJ!
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4739
Joined: Wed May 28, 2003 7:02 am
Location: KANSAS
Contact:

Post by Jimny » Mon Mar 27, 2006 8:07 am

Part 2 is up! :cool:

http://www.lj10.com/howto/axle/part2/

Smuz you outdid yourself again! Great job!
I'd rather be driving my LJ!
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7542
Joined: Thu Jun 12, 2003 9:26 am
Location: Seattle WA area

Post by stevec » Mon Mar 27, 2006 11:22 am

That's a great write up Smuz! I've seen similar type writeups in magazines, etc., and yours is definitely the best! Don't you go gettin' a job writing now though, you'd have less time to work on LJ's! :wink:

I have one comment and one question: First, you are correct: the shims are available new still, in two thicknesses: .5mm and .1mm. Second, you quoted the wheel bearing number as 6202RS; my notes say it's 6206RS. I doubt that these are the same, so I think one of us has a typo. I'll check my numbers; would you kindly do the same please? :D I'm pretty sure my number is correct, as I have some NOS on the shelf, with both the OEM part number and the Koyo number, but maybe I copied it wrong.
The only difference between an ordeal and an adventure is your attitude
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

Post by Smuz » Mon Mar 27, 2006 11:59 am

Second, you quoted the wheel bearing number as 6202RS; my notes say it's 6206RS.
Hmmmmm. Right here in my notes it says 6202RS. I gotta couple laying out in the shop, I'll go get one in a bit and double check. You may be right, I got a diff carrier bearing laying here that's about the same size as the wheel bearings and it's a 6207.

BTW: I think the "RS" suffix stands for "Rubber Shielded".
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

Post by Smuz » Mon Mar 27, 2006 12:18 pm

By Gawd, Stevie, you iz right! It IS 6206RS. I musta copied it down wrong.
Good catch, eagle eye :D

Jimny, can you fix that? It's on page 7, right at the top.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3425
Joined: Thu Jun 05, 2003 6:53 pm
Location: Kansas City (Lenexa)

Post by Smuz » Mon Mar 27, 2006 1:02 pm

That's a great write up Smuz! I've seen similar type writeups in magazines, etc., and yours is definitely the best!
Them other writers are getting paid too much then. This thing took slightly less than two hours to write up and insert pics, including typos (I gotta proofread a little better).

One thing I didn't stress and should have is to have a copy of the service manual handy and referr to it often. My write up was intended to illustrate and supplement the service manual, not to replace it. All torque and other values should come from the manual.

As a matter of fact, I'm gonna put that in a sticky announcement rat now!
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4739
Joined: Wed May 28, 2003 7:02 am
Location: KANSAS
Contact:

Post by Jimny » Tue Mar 28, 2006 6:29 am

I'm at work but I will go into the back door and fix it.

Consider it done.
I'd rather be driving my LJ!
Post Reply