Axle Bearing / Oil filter numbers

Any other parts that are direct replacements.

Moderator: stevec

Post Reply
don h
LJ Gear Head
LJ Gear Head
Posts: 26
Joined: Wed Feb 16, 2011 3:00 pm
Location: Calgary Alberta

Axle Bearing / Oil filter numbers

Post by don h » Sat Dec 26, 2015 3:15 pm

I'm having a problem finding rear axle bearings locally for my LJ80 , and no parts place has a listing for an oil filter ! Would anyone know the part numbers for these things ? Thanks Don
User avatar
Frankenstein
Spammer Hammer
Spammer Hammer
Posts: 3115
Joined: Wed Mar 08, 2006 12:23 pm
Location: Schipluiden, Netherlands
Contact:

Re: Axle Bearing / Oil filter numbers

Post by Frankenstein » Sat Dec 26, 2015 4:38 pm

Bearing is a 35x72x17mm should be a 3500 bearing accoarding to the partnumber but i'm not sure on this one. Size points to a 6207 bearing. Oilseal is a 48x62x9. You need a bearing retainerring too.

Original oilfilternumber is 16510-73000. Here is a crossreferencepage: http://www.oilfilter-crossreference.com ... 6510-73000" onclick="window.open(this.href);return false;
Attachments
076 FIG 53 REAR AXLE.jpg
I hate rust...

The older I get the better I was...

http://www.suzukilj80.nl" onclick="window.open(this.href);return false;
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7520
Joined: Thu Jun 12, 2003 9:26 am
Location: Seattle WA area

Re: Axle Bearing / Oil filter numbers

Post by stevec » Mon Dec 28, 2015 4:23 pm

Oil filter is the same as the SJ410 and Samurai/SJ413.
The only difference between an ordeal and an adventure is your attitude
zukimoo
LJ Enthusiast
LJ Enthusiast
Posts: 1496
Joined: Mon Oct 03, 2005 9:03 pm
Location: Moncton, nb , Canada

Re: Axle Bearing / Oil filter numbers

Post by zukimoo » Tue Dec 29, 2015 6:13 am

not sure if it's the same at the SJ413 but when I went to the local parts store the number for the SJ410 was discontinued but they had 6 as old stock. I bought them all at $3 a piece.
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go

Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
don h
LJ Gear Head
LJ Gear Head
Posts: 26
Joined: Wed Feb 16, 2011 3:00 pm
Location: Calgary Alberta

Re: Axle Bearing / Oil filter numbers

Post by don h » Wed Dec 30, 2015 1:08 pm

Frankenstein wrote:Bearing is a 35x72x17mm should be a 3500 bearing accoarding to the partnumber but i'm not sure on this one. Size points to a 6207 bearing. Oilseal is a 48x62x9. You need a bearing retainerring too.

Original oilfilternumber is 16510-73000. Here is a crossreferencepage: http://www.oilfilter-crossreference.com ... 6510-73000" onclick="window.open(this.href);return false;
Thanks for the info I found a shop Motion Canada and had them installed on my axles , bearings $17.82 each they had to use heat and extreme measures to do the job ! Total bill $221.51 , holly crap it would have been cheaper to get a couple used axles !!
zukimoo
LJ Enthusiast
LJ Enthusiast
Posts: 1496
Joined: Mon Oct 03, 2005 9:03 pm
Location: Moncton, nb , Canada

Re: Axle Bearing / Oil filter numbers

Post by zukimoo » Thu Dec 31, 2015 4:17 pm

you got the motion part number?
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go

Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
don h
LJ Gear Head
LJ Gear Head
Posts: 26
Joined: Wed Feb 16, 2011 3:00 pm
Location: Calgary Alberta

Re: Axle Bearing / Oil filter numbers

Post by don h » Sat Jan 02, 2016 11:27 am

zukimoo wrote:you got the motion part number?
You bet , 6207-2RS1/C3
zukimoo
LJ Enthusiast
LJ Enthusiast
Posts: 1496
Joined: Mon Oct 03, 2005 9:03 pm
Location: Moncton, nb , Canada

Re: Axle Bearing / Oil filter numbers

Post by zukimoo » Sat Jan 02, 2016 5:04 pm

did the motion bearing come with the retaining collar?
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go

Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
don h
LJ Gear Head
LJ Gear Head
Posts: 26
Joined: Wed Feb 16, 2011 3:00 pm
Location: Calgary Alberta

Re: Axle Bearing / Oil filter numbers

Post by don h » Sun Jan 10, 2016 4:07 pm

zukimoo wrote:did the motion bearing come with the retaining collar?
No the retainer coller is a separate piece , might be hard to find , the shop polished mine so the oil seal should work fine !
zukimoo
LJ Enthusiast
LJ Enthusiast
Posts: 1496
Joined: Mon Oct 03, 2005 9:03 pm
Location: Moncton, nb , Canada

Re: Axle Bearing / Oil filter numbers

Post by zukimoo » Mon Jan 11, 2016 5:34 am

I had a retainer removed once with torches but I doubt that retainer would enjoy it a second time.
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go

Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
Post Reply