Alternative shifters

Any other parts that are direct replacements.

Moderator: stevec

Post Reply
User avatar
dunstan
LJ Enthusiast
LJ Enthusiast
Posts: 234
Joined: Thu Sep 13, 2012 2:55 pm
Location: San Francisco, CA
Contact:

Alternative shifters

Post by dunstan »

I was wondering if the type of shifter found in the LJ (especially the LJ10) has a particular name?
http://1976design.com/lj10/parts/17/" onclick="window.open(this.href);return false;

I know it's a manual 4-speed, but all the manual 4-speed shifters I see out there look incompatible.

Even if it doesn't have a particular name, are there other shifters that I could replace it with, if I wanted a different look, or feel?

Thanks.
Photos of my LJ10: http://flic.kr/s/aHsjCfr8gy
Manuals for the LJ10: http://1976design.com/lj10/
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Re: Alternative shifters

Post by stevec »

The shifter you see from the driver's seat is just the lever you move to change the gears - the actual shift case of the transmission is about 10 inches forward of this. You can put a different one on if you don't like the look, but the detent balls are all in the shift case of the transmission, so it won't change the way it feels.
The only difference between an ordeal and an adventure is your attitude
User avatar
dunstan
LJ Enthusiast
LJ Enthusiast
Posts: 234
Joined: Thu Sep 13, 2012 2:55 pm
Location: San Francisco, CA
Contact:

Re: Alternative shifters

Post by dunstan »

Well that's a helpful clarification, thank you Steve. It's good to know that it won't change the feel at all.

If I did want to put in another stick – basically replace everything on this page http://1976design.com/lj10/parts/17/" onclick="window.open(this.href);return false; – where would I look? All the units I've seen so far seem to be specific to makes and models of cars. Does the Samurai use the same setup as we do?

I guess I was hoping someone would say "There are four main kinds of manual shifter setups in the world, and the LJs use the XYZ system. Just search for XYZ and you'll find things that can be swapped in."
Photos of my LJ10: http://flic.kr/s/aHsjCfr8gy
Manuals for the LJ10: http://1976design.com/lj10/
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Re: Alternative shifters

Post by stevec »

LJ's are going to be somewhat unique in that the gear shifter is separate from the transmission. On Samurai's, the shifter fits right into the top of the shift case on the transmission, whereas on LJ's there is a shaft that connects the shifter to the shift case on the transmission.

In my opinion, the "feel" of a shifter isn't as important on a manual transmission anyway. On an automatic transmission, different shifters can make the transmission shfter harder or softer, at a specified rpm, etc., whereas on a manual tranny, that is all controlled by the driver. As long as the gears are easy to find and engage, and you can feel when that gear is engaged, the only thing that could "feel" different is if there is slop in the shifter. This would be remedied by replacing bushings in the linkage, not the linkage itself.
The only difference between an ordeal and an adventure is your attitude
User avatar
Myers
LJ Enthusiast
LJ Enthusiast
Posts: 1269
Joined: Sat Aug 26, 2006 11:56 am
Location: Oklahoma

Re: Alternative shifters

Post by Myers »

Someone on the forums described the LJ shifting as being vague, which is about as accurate description as I have heard. This results in the driver’s frustration being taken out on.....what else? ....the shifter..... which soon makes matters only worse.

When I first got Miss Alice, the shifter had so much slack I would sometimes shift from 3rd to 2nd instead of the 3rd to 4th as I had intended. This proved the shifter as crap but spoke well for the synchronized tranny. I found the bushings Stevec referred to were gone..... completely gone.....like not there.

Believe Stevec still has the originals for sale. A pretty easy installation and they will work ok IF you picture the letter H in your mind each time you shift.

I have started handcrafting mine out of a hard rubber plumber’s plug and then cut it into two halves. Considerably more effort but I can make them tight enough the two halves have to pressed in with a shop press. This provides the movement needed but with a much better and tighter feel plus last longer. Strangers to the vehicle can get in and have no problems shifting.
"LJsRME"
zukimoo
LJ Enthusiast
LJ Enthusiast
Posts: 1498
Joined: Mon Oct 03, 2005 10:03 pm
Location: Moncton, nb , Canada

Re: Alternative shifters

Post by zukimoo »

When I first started to drive my LJ I found myself in 1st rather than 3rd and it showed itself really fast. Once you get used to the way it feels then it's alot of fun. You can't just slam the shifter into the next gear. Looked for a spare tranny for a while before realizing that reverse wasn't broken but I was just not finding it. We pushed that thing back all around the yard.
81 LJ80, 3500lbs winch, 1.0 HO, 1000cc's of pure power....brap...listen to her go

Mods 2 come
-Lockrite in the back, -spring over done right and complete,-cross over steering,-seats,-6000lbs +- winch on front,-3500lbs winch ,moved to back,-highlift jack
Post Reply