Page 1 of 1

LJ80 jimny gearbox

Posted: Wed Mar 12, 2008 12:47 am
by willojr1
hey everyone, just got myself a LJ80 an as expected for 350 there are problems, main one is my gear box, don't have 3rd but still goes alrite besides the gear box is really loud, does anyone know where i could find a gearbox for it? if not could i get a gear box from another car? and another thing does anyone know of a brocken speedo cable to make a noise? well hope to hear from someone soon thanks

Posted: Wed Mar 12, 2008 1:21 am
by ResidentPsycho
im guessing a syncro gear has packed it and wont let it engage 3rd. worn bearings in the gearbox will more than likely cause it to be loud. sierra tranny's dont fit, completely different motor.
im not sure if the sj410 gearbox will fit (it has a F10A engine, the lj80 has a F8A), one of the other guys will probably chime in with a suggestion :wink:

welcome to the site!!! some pics of your rig would be nice aswel :D

Posted: Wed Mar 12, 2008 1:41 am
by willojr1
thanks for the reply, it will get into 3rd no problem, but makes a even louder noise :S so yea think me best chance is to replace the whole thing? or would i be able to pull apart the gear box and repair it? new to this so unsure how to lol so help with that would be good thanks lol[/img]

Posted: Wed Mar 12, 2008 9:26 am
by Suzy
One of mine just did this. It was alwys a little rattly and then one day third started making more noise. Swapped the trans out and found one of the third gears had chucked a couple of teeth. SJ 410 box should bolt up but you will need to swap the shifter mounts. Gear ratios are slightly different.

John