The original keys for the LJ10 and LJ20 are different from modern keys, in that they are only cut on one side, whereas most modern car keys are cut the same on both sides (so it fits upside down). The V was missing the keys when I got it, so I just ordered a new ignition switch from Suzuki. It's the same, except the keys are the "modern" style (same as on my Samurai, in fact). It works fine, except that I can't use them in the doors, so I have to make sure I don't lock it. On convertibles, this is less of an issue, except that the key also fits the glovebox. I've had a couple of people ask about this, but the original key style is somewhat unusual, and so locksmith's have a hard time finding it. I even ordered a blank from Suzuki, and it too was the newer style.
Well, thanks to McKFam, another LJ problem has been solved. After much research, McKFam found a key blank that works. It's an old Toyota key, and the style number is TA6. So if you've lost your keys, or just want another spare, this is the blank you need! I myself am going to get a couple, and make sure they're cut to fit the door locks and (original) ignition switch on the V! If anyone has trouble finding these blanks, PM me or McKFam.
McKFam, thanks for all your hard work!!!!!!!!
LJ Keys
Moderator: stevec
LJ Keys
The only difference between an ordeal and an adventure is your attitude
- woodchopper
- LJ Enthusiast
- Posts: 217
- Joined: Wed Jul 18, 2007 11:58 am
- Location: Edmonton Alberta Canada
- Contact: