Check List

We are planning an LJ meeting in Colorado for June 21-23, 2005.

Moderators: stevec, Jimny

User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4751
Joined: Wed May 28, 2003 8:02 am
Location: KANSAS
Contact:

Check List

Post by Jimny »

1-Re-jet your carbs for the altitude. ifxatvs can get you the jets that you will need. PM or email them, they will need to know what carb you have.

2-Warm Clothing. It will be T-Shirt warm during the day but at night it does drop down to where you will need a jacket.

3-Shelter Tent, camper or your enclosed vehicle plus a warm sleeping bag.

4-Permits If your LJ is not registered in your home state you will need a permit to go on the trails. More about that in the future.

5-First Aid kitsNeed I say more?

6-Food, eating utensilsBring enough food for your stay plus eating utensils, one night we might have a cookout for everyone.

7-Trash Bagsbring trash bags, I'm sure there will be dumpsters to throw your trash in. I'm sure everyone knows this but it's part of a Check List :wink:


*I will add more later....*
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

In reading various trip reports on the web and such, it sounds like mid to late July they pretty much have a brief rain daily. The day starts out sunny and warm, then in the afternoon the clouds build up for a brief t-shower, then by sundown it's nice again. We'll be there in early July, so we may avoid this, but please come prepared for rain. The passes are over 12,000' so snow is a possibility as well! :shock:
The only difference between an ordeal and an adventure is your attitude
User avatar
DrizSki
LJ Enthusiast
LJ Enthusiast
Posts: 69
Joined: Sun Jul 18, 2004 9:11 am
Contact:

Jetting the carbs

Post by DrizSki »

Hi,

As a lover of all things low -- I need to know a little more about rejetting the carbs - is this something you do at the site, at home, or what?

Mike
Since I'm not at home accepting the things I can't change - I must be out changing the things I can't accept!
User avatar
Idahopaul
Lead Foot
Lead Foot
Posts: 647
Joined: Wed Feb 18, 2004 1:49 pm
Location: northern Idaho

Post by Idahopaul »

ya, Im gonna have to get some jets for my datson!
Strength is for service, not status.
Each one of us needs to look after
the good of the people arounds us,
"How can I help?"
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

Yeah, I need jets for the stock carbs on Wilson and Sancho and jets for the Weber on Mouser. EeeeK!!!!!

Thanks for reminding me.

Darrick, where are you? I need sum jets!
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

Ok, here's a VERY complete check list of things to take wheeling. I copied this from the July issue of "4X4 Builder" magazine. This guy tried to think of everything, so it's a LONG list. Use it for reference.

1. Prescription Medicine
2. Extra prescription glasses
3. Water
4. Fuel
5. Waterproof Matches
6. Utility knife
7. Food
8. Fire extinguisher
9. Cell phone
10. CB radio
11. Two way radio
12. First aid kit
13. Insect repellant
14. Sunscreen
15. Spare ignition key
16. Full size inflated spare
17. Lug wrench
18. Jumper cables
19. Trash bags
20. Toilet paper
21. Bungee cords
22. Hand cleaner
23. Paper towels
24. Front and rear tow hooks
25. Tow strap (20 ft. minumum) and shackles
26. Tire chains
27. Ice scraper and brush for windshield
28. Extra fuel
29. Extra oil
30. Standard bottle jack
31. Wood jack plate for soft ground
32. Hi-Lift jack
33. Tool kit
34. Complete tire repair kit
35. J-B weld
36. High calorie emergancy food
37. Silicone sealant
38. Fuses
39. Fan and accessory belts
40. Air or CO2 tank with hoses
41. Brake fluid
42. Work gloves
43. Shop rags
44. Come-along (5000 lb. min. capacity)
45. Complete change of clothing
46. Blankets (1 per person, min.)
47. Waterproof, heavy duty coat
48. Cap or hat
49. Maps
50. Compass
51. Axe or hatchet
52. Shovel
53. Money
54. Coins for pay phone
55. Binoculars
56. Camera
57. Camping/fire permits
58. Flashlight w/ extra batteries
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

Ummm, you DO know that an LJ only has a 250kg load capacity, right? (200kg for hardtops).
The only difference between an ordeal and an adventure is your attitude
User avatar
tweeder
Resident Smart Arse
Resident Smart Arse
Posts: 1443
Joined: Tue May 11, 2004 8:44 pm
Location: Cabot, AR

Post by tweeder »

shoot, i'd have a hard time fitting all that crap into my BroncoII with the rear seats folded down!!! :shock: :shock: :shock:
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

I SAID it was for "reference", you morons.

A coupla things on there I never would have thot of (spare glasses and ignition key), so it's good to look thru it.

Jeeze!
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
russmehl
Whats in Your Garage?
Whats in Your Garage?
Posts: 2070
Joined: Sun Aug 24, 2003 11:33 pm
Location: South East Michigan

Post by russmehl »

44. Come-along (5000 lb. min. capacity)
I know I've put on a little weight lately, but 5000 lb. ?

Oh, Right!
It's all that stuff Smuz is gonna pack into that tiny space... so we can winch him out of any holes he might fall into.

Russ
(Good thing Smuz can't reach all the way to Michigan, he's gonna come out swinging...)
User avatar
thesarg
The Procrastinator
The Procrastinator
Posts: 268
Joined: Sun Jul 11, 2004 9:32 am
Location: Forest, Ontario, Canada

Post by thesarg »

I'm within smacking distance of him Smuz just lemme know ;)

U guys better take tons of pics u lucky bastids!!!!

Can we have it in Canada 2006 so i can go???
If you cant afford it, fab it!
User avatar
tweeder
Resident Smart Arse
Resident Smart Arse
Posts: 1443
Joined: Tue May 11, 2004 8:44 pm
Location: Cabot, AR

Post by tweeder »

Smuz wrote:27. Ice scraper and brush for windshield
whut's dat fer? my ice is either in da freezr or in my glass. :D
thesarg wrote:Can we have it in Canada 2006 so i can go???
or down this direction so this broke college student ain't gotta blow the bank
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

Oh Russ. I have yer name on my list. Ya better bring yer bullet proof underware to the meet next year.

Sarge, if you kin reach him, slap him TWICE!
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4751
Joined: Wed May 28, 2003 8:02 am
Location: KANSAS
Contact:

Post by Jimny »

So how important is re-jetting the carbs?

Do we really need to do it?
And if so...

What size?

I know Ifxatvs said they could order them for us. We just have to give the the maker name of the carbs we have.
I'd rather be driving my LJ!
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

Good question. I've run my LJ10 from sea level up to about 6000' with no ill effects, but we'll be twice that high, and that's when it could become an issue. I'm not sure how much of an issue though. It's only one day, and if we can get by with just adjusting mixture and/or timing, I'd be fine with that. I don't have much experience with high altitude wheeling, so I've never had to change the jets.

In looking at the carb, it should be quite easy to do. Probably don't even have to take the carb apart, right?
The only difference between an ordeal and an adventure is your attitude
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

Probably don't even have to take the carb apart, right?
Hahahahahaha. You dreamer.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

Which ones do ya gotta change? All of 'em? Seemed to me that on my LJ10 you could get to at least a couple from the top, without even removing the top. Don't remember which ones though...
The only difference between an ordeal and an adventure is your attitude
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

dunno, haven't got into that yet. Prolly oughta start thinkin about it, tho.

I also gotta do the Weber on Mouser.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
Idahopaul
Lead Foot
Lead Foot
Posts: 647
Joined: Wed Feb 18, 2004 1:49 pm
Location: northern Idaho

Post by Idahopaul »

how are we gunna know what size or how many sizes we should drop to?
boy, with my flooding problem down this low its anoying so up that high it probably would die! :oops: gues I should rebuild the carb too!
Strength is for service, not status.
Each one of us needs to look after
the good of the people arounds us,
"How can I help?"
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4751
Joined: Wed May 28, 2003 8:02 am
Location: KANSAS
Contact:

Post by Jimny »

That's a good question Paul. I have been trying to find that out from ifxatvs for the past month but they haven't returned my PM's or emails or phone calls, so I guess we will have to get them somewhere else. I will do some checking this week to see what we need, and I will get some and who ever needs them I will send them a set by mail.
I'd rather be driving my LJ!
User avatar
Smuz
Resident Curmudgeon
Resident Curmudgeon
Posts: 3445
Joined: Thu Jun 05, 2003 7:53 pm
Location: Kansas City (Lenexa)

Post by Smuz »

For what the information is worth:

I been researching Weber adjustments. Webers have 1) 2 Idle jets. 2) 2 air correction jets. 3) two emulsion tubes. 4) 2 main jets. They also have an accelerator pump jet. Once they are properly tuned, they can be corrected for altitude. This is what they have to say about altitude correction:

"Reduce the primary main jet one size for every 3,000 feet of altitude increase. Altitude correction is typically done to the primary circuit only."

So, onct I get Mouser's Weber tuned, I gotta drop the primary main jet 3 sizes for the Colorado meet.

Like I said, for what it's worth.
The above is my opinion. It is subject (like all my opinions) to debate, disagreement, rude gestures, and loud raspberries.
User avatar
KDKG
LJ Enthusiast
LJ Enthusiast
Posts: 221
Joined: Sat May 29, 2004 9:51 am
Location: Colorado Springs, Colorado

Post by KDKG »

If I had to changed my jets everytime I increased 3000 ft in altitude , I would never do any wheeling...

That being said, Colorado Springs is at 6800. Silverton is at 11,945.

I regularly wheel at around 11,000 and have gone as high as 14,000.

The question on your mind, do I flood out? Hell yes but only on extreme angles. That could be my weber sloshing too.


I alternate between a manual fuel pump and an electric one (as a booster) as needed to keep it running while climbing.

What size jets do I run, couldn't tell you... Don't know, it came with the Sami.

Thinking about installing a pressure regulator and a air/fuel gauge so I can adjust on the fly. Also Looking into switching to propane.

I personally am more concerned about you guys. That high alititude still kicks my butt and I have been here a while. Air is mighty thin around here...
Home, Retired, and looking like a hippie.
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

I believe you can replace the main jet without actually disassembling the carb, at least on my LJ10 carb. Don't remember how easy it is to do on the 20 though. I don't plan on rejetting mine at all before I go. I'll drive one of 'em a bit in Yellowstone the week prior, so I'll see how it does there. Since most of the wheeling is mild (unless you want to do some other side trips), I don't think we'll have too much problem.

Silverton is at an elevation of 9318 feet; the Eureka campsite we'll be at is around 11,000' I think, and the Alpine Loop has two 13,000'+ passes, Engineer and Cinnamon Pass. I might try that "exercise" thing if I can, to make the altitude a bit easier to handle.
The only difference between an ordeal and an adventure is your attitude
User avatar
Jimny
It's an LJ thing!
It's an LJ thing!
Posts: 4751
Joined: Wed May 28, 2003 8:02 am
Location: KANSAS
Contact:

Post by Jimny »

exercise
?? What is this exercise thing I keep hearing about? Is it a new thing? I seen one guy lifting up a brown bottle up to his mouth and back down I asked him what he was doing and he said he's doing the 16oz arm curls. If that's exercise then count me in.

And if KDKG gets winded and he's in great shape being a Marine, oh I will pass out if I walk 20 feet on flat ground. :wink:
I'd rather be driving my LJ!
User avatar
stevec
The Parts Dude!
The Parts Dude!
Posts: 7664
Joined: Thu Jun 12, 2003 10:26 am
Location: Seattle WA area

Post by stevec »

Jimny wrote:...if KDKG gets winded and he's in great shape being a Marine, oh I will pass out if I walk 20 feet on flat ground. :wink:
Yeah, that's what worries me...
The only difference between an ordeal and an adventure is your attitude
Post Reply